Working principle of rebar stirrup bending machine
The steel bar bending machine is composed of a motor, a belt pulley, a reduction gear, an eccentricity adjustment, a working plate, a central shaft, a forming shaft, etc. Its structure and the structure of the working plate are the same as the bending machine.
The steel bar bending machine is driven by a motor through a pair of belt pulleys and two pairs of variable speed street wheels to drive the Boxin disc to rotate, and the eccentric ring disc uses a connecting rod, a rack, and a gear. The working disc on the worktable can be rotated at the same time. Bending hoop reinforcement work. The working plate of the steel bar bending machine works on the same principle as the steel bar bending machine, except for the process of bending the steel bars. The steel working plate makes a reciprocating movement within the adjusted angle, and the bending angle of the steel bar bending machine can be 180 It can be adjusted arbitrarily within the range, and the angle deviation of the steel bar of the same angle is very small, which is especially suitable for the steel products of the same angle shape; so now many steel bar processing units use this type of steel bar bending machine.
The fully automatic CNC steel bar bending machine can automatically complete the steps of straightening, sizing, bending and cutting of the steel bar. The processing capacity is very comprehensive. It can bend in both directions and freely control the expansion, up and down of the mandrel, so it can process more and more complex shape. With the continuous development of the CNC industry, more and more industries and companies have used hoop bending machines, and more and more companies have entered the hoop bending machine industry.